Japan Airlines cruiser Mogami plastic model assembly kit. 1/350 scale, total length 573 mm, total width 76 mm. The unique style with the flight deck at the rear of the hull is fully modeled as it was when the renovation was completed in 1943. The upper part of the hull is split into left and right, and the lower part is an integrated part, and the hull form including the beautiful bow is reproduced with a rich sense of reality. Large parts such as the hull and flight deck are screwed to ensure reliable assembly. Reproduced by capturing the features of the top model such as a compact bridge structure and a guided chimney. The bridge window and the lens part of the searchlight are transparent parts to add a realistic accent. The main turret, torpedo launcher, high-angle gun and catapult can be turned even after completion. The main barrel has parts for normal and anti-aircraft combat. It can be replaced even after completion with a poly cap. The front and rear masts and flagpoles are made of ABS resin, which is hard to break. The anti-aircraft machine gun of each part has a fine finish including the flame suppressor and the heat sink. Delicate etched parts are available for cranes, catapults, carrier-based aircraft propellers, carriers, gliders, etc. The anchor chain and propeller shaft are made of metal. A set of 3 zero-type seaplanes and eight zero-type seaplane reconnaissance aircraft as carrier-based aircraft. The delicate mold has a sufficient presence. There is also a stand where you can display the carrier-based aircraft in flight. Please ask us before you open a case. We will do our best to solve a problem. If you find any problems/defections with our products, please feel free to contact within 1 week from the day when you received and allow up to 24 hours to answer your question. International Buyers – Please Note. Please check with your country?