11 EX-3 IJN Aircraft Carrier KAGA Battle of Midway 1942 Kit F/S. Plastic model kit that needs to be assembled and painted. Brand: Fujimi Model (FUJIMI) Color: Grey Cartoon Character: Hiryu Product Dimensions (L x W x H): 10 x 80 x 27 cm Material: Plastic Part No. The product is an unpainted kit that requires adhesive assembly and painting. The aircraft carrier ” Kaga” is under construction as the second Tosa-class battleship, and was completed as an aircraft carrier as a replacement for the cancellation of construction by the Washington Conference on Disarmament and the damage to Amagi during construction due to the Great Kanto Earthquake. Initially, it had an exterior with a multi-deck, but in 1944 1945 it was renovated to the modern style of a full-deck at the Sasebo Navy Yard. The product can reproduce the appearance at the time of the Battle of Midway in June 1942. / Comes with a special decal including an identification sun circle drawn on the front edge of the flight deck. It can be made with a modeling expression unique to the large scale of 1/350. / The hull / bottom is an integrated shape, and it is a left and right bonding type. / The flight deck consists of three pieces: front, middle, and rear. / The front steel deck part expresses the seam with concave carving. It also expresses the preparation of catapult equipment. / The wooden deck in the center of the flight deck reproduces the appearance of the board material being tensed with delicate sculptural expression. / The rear end expresses a non-slip strip pattern with a convex mold. / The landing braking line and sliding stop device are reproduced with the included etched parts. / You can choose one of the two forms of the wind shield fence that you can knock down, and in the case of standing upright, the back side is also expressed. / The truss structure behind the flight deck is separate from the flight deck, and the front and rear positions are prepared. / The crane behind the stern flight deck is shaped with a feeling of hollowness with one-piece part rails and multiple separate parts struts. / Bow flight deck struts can be selected with 4 or 6 settings. / The bow anchor deck uses metal parts in addition to plastic parts. / The floor surface of the 12.7 cm high angle turret firmly reproduces the strip pattern with a convex mold. / The carrier-based elevator can be selected from two types: the ascending state and the position of the upper stage of the hangar. / The elevator also has a molded eye ring for fixing the carrier-based aircraft. / The bridge has a structure in which the base is divided into left and right parts, and the upper layer is a part stacking type structure, and molds are applied to the entire circumference. / The appearance of a binocular telescope for watchtowering at the top is expressed by telescope parts that have been made into separate parts. / The search light equipped on the bridge and the window of the compass bridge are transparent molded. / The chimney consists of two upper and lower parts, and the depth of the smoke path is expressed. / The 25mm machine gun has a 4-part configuration and is divided into parts for realistic modeling. / The 12.7 cm high-angle gun (with shield) has a separate shield part and a gun barrel. / The 12.7 cm high-angle gun has a six-part configuration and is shaped into a retractor/propulsion device on the barrel. / The rudder reproduces the unevenness and curved surface of the surface and frame part. / Three types of carrier-based aircraft are included: Zero type carrier-based fighter type 21, Type 99 carrier-based bomber, and Type 97 carrier-based attack aircraft. / The molding color is transparent, and the canopy is real when completed. / There are three types of decals attached, including white lines on the flight deck and markings for carrier-based aircraft. / One cut paper seal including signal flag, warship flag, and general flag is included. The molded parts are available in three colors: gray, transparent and black. Dimensions at the time of completion 71 x 9.2 cm (long x width) [Attached contents] / Runner x94 / Assembly instruction manual x3 / Decal x6 / Metal parts x2 / Paper seal x1 This product is made Japan. This product is a plastic model kit that needs to be assembled. International Buyers – Please Note.